Skip to main content
Laboratory Centrifuge 800-1
Laboratory

Laboratory Centrifuge 800-1

Reference
LM-LAB-002
Model
800-1

The 800-1 is a compact benchtop laboratory centrifuge for clinics, laboratories and blood collection points.

At a glance

  • Size: L245 × W245 × H230 mm (typical for this model)
  • Type: Benchtop low-speed laboratory centrifuge
  • Maximum speed: 4,000 rpm, adjustable with a speed knob
  • Timer: 0–60 minutes, set with a timer knob

Photos are for illustration.

Overview

The 800-1 is a compact benchtop laboratory centrifuge for clinics, laboratories and blood collection points. It spins six 20 ml tubes at speeds up to 4,000 rpm, with a timer of up to 60 minutes, and two front knobs set the speed and the time. A clear lid with a latch keeps the rotor covered and visible while it runs. Figures shown are typical for this model; your quotation confirms the exact specification, voltage and plug.

Key features

  1. 01Speed adjustable up to 4,000 rpm, giving relative centrifugal force of about 1,790 ×g for everyday separation work.
  2. 02Timer from 0 to 60 minutes, set with a simple front knob.
  3. 03Fixed-angle rotor takes six 20 ml tubes, 120 ml in total, per run.
  4. 04Two-knob control on a clearly labelled front panel: one for speed, one for time.
  5. 05Clear lid with a latch keeps the rotor covered and lets the operator see it while it runs.
  6. 06Rubber feet on the base keep the centrifuge steady on the bench.
  7. 07Compact white body that fits easily on a laboratory bench and wipes clean.

Technical specifications

SizeL245 × W245 × H230 mm (typical for this model)
Model800-1
TypeBenchtop low-speed laboratory centrifuge
Maximum speed4,000 rpm, adjustable with a speed knob
Maximum relative centrifugal forceAbout 1,790 ×g
Timer0–60 minutes, set with a timer knob
Rotor and capacityFixed-angle rotor, 6 tubes × 20 ml (120 ml)
ControlsTwo front knobs: speed and timer, on a labelled front panel
LidClear lid with a latch, so the rotor can be seen while running
StabilityRubber feet on the base
BodyCompact white casing
PowerAbout 25 W (typical for this model)
Available on requestVoltage and plug, Weight

Confirmed specifications only; pending items are marked.

Buying notes

The 800-1 is a small, simple centrifuge for clinics and blood collection points. It is easy to place on a bench and easy to teach to new staff. Count the tubes you spin in a normal hour first; that tells you if its capacity suits you.

Care and use

Balance the tubes opposite each other before every run, and close the lid fully. Stand it on a firm bench and wipe the chamber if anything spills.