
LM-ANA-003
An oxygen regulator with flowmeter for hospitals, clinics, ambulances and home-care use with oxygen cylinders.
At a glance
Photos are for illustration.
An oxygen regulator with flowmeter for hospitals, clinics, ambulances and home-care use with oxygen cylinders. A pressure gauge in a green protective boot shows the cylinder pressure, a clear glass flowmeter shows the flow being delivered, and a control valve sets the flow. The chrome-plated body screws onto the cylinder and the outlet connector takes the humidifier or tubing.
| Type | Oxygen regulator with flowmeter |
|---|---|
| Cylinder pressure gauge | Dial gauge with a green rubber protective boot and coloured zones on the scale |
| Flowmeter | Clear glass tube with a printed scale |
| Flow control | Green control valve for setting the flow |
| Body | Chrome-plated metal body |
| Cylinder connection | Threaded inlet with nut, for connection to the cylinder valve |
| Outlet | Threaded outlet connector at the bottom of the flowmeter |
| Marking | Marked "OXYGEN REGULATOR" on the body |
| Available on request | Flow range, Inlet pressure rating, Inlet connection standard and 2 more |
Confirmed specifications only; pending items are marked.
A regulator is a small part with a big job, so compatibility is everything: cylinder connection, flow range and where it will be used. For ambulances and home-care, tell us what cylinder fittings you have. If staff will move it around, ask about handling and storage too.
Fit it to a clean, dry cylinder valve and open the valve slowly. Never use oil or grease near oxygen fittings, and check the flow reading and the connections each time.

LM-ANA-003
LM-ANA-004
LM-ANA-005